How to Read Quotex Signals
Every signal on Quotex Signal Bot is built from real-time indicator data — RSI, Stochastic, MACD, and Bollinger Bands. Here's how to read each part of the signal card.
Signal Card Anatomy
Pick a pair and expiry — the card shows these data points:
- Direction (CALL / PUT)
- CALL — the indicators point upward. On Quotex, you open a CALL (Up) trade. You expect the price to be higher at expiry than at entry.
PUT — the indicators point downward. On Quotex, you open a PUT (Down) trade. You expect the price to be lower at expiry.
- Confidence (50–85%)
- How many indicators point the same way. 65%+ = strong agreement. Below 60% = indicators are split, signal carries more uncertainty. The score is built from RSI, Bollinger Bands, MACD, and Stochastic — each adds or subtracts points based on its reading.
- Momentum (0–100)
- How far the indicators are from neutral. High momentum = indicators at extremes (deep oversold RSI, price at band edges, fresh MACD crosses). Strong momentum usually means a mean-reversion setup — high potential, higher volatility.
- Entry Price
- The current market price at the moment the signal was fetched. This is your reference level. Your trade outcome depends on whether the price moves above (CALL) or below (PUT) this level at expiry.
- Change %
- How much the price has moved in the last 24 hours. Large moves (>0.3%) indicate high volatility — signals may be more reactive. Small moves (<0.08%) suggest a quieter market where signals might take longer to play out.
- Volatility
- Low — price is moving within a tight range. Signals may need wider expiries.
Moderate — normal conditions. Signals tend to resolve within expected timeframes.
High — rapid price swings. Signals can produce fast results but also fast reversals.
Understanding the Indicators
The signal card displays six indicator values. These six numbers drive every CALL or PUT signal on the site.
| Indicator | What It Measures | How to Read It | CALL Signal (Bullish) | PUT Signal (Bearish) |
|---|---|---|---|---|
| RSI (14) | Momentum strength over 14 candles | 0–100 scale. Below 30 = oversold. Above 70 = overbought. | Below 35 — price may be undervalued, reversal up likely | Above 65 — price may be overvalued, reversal down likely |
| Stoch %K | Price position relative to recent high-low range | Faster than RSI. Below 20 = oversold. Above 80 = overbought. | Below 25 — short-term bounce possible | Above 75 — short-term pullback likely |
| Stoch %D | Signal line (moving average of %K) | When %K crosses above %D → bullish. Below → bearish. | %K > %D while both are low | %K < %D while both are high |
| BB Position | Where price sits between the upper and lower Bollinger Bands | 0% = at lower band. 50% = middle. 100% = upper band. | Below 20% — price near lower band, snap-back expected | Above 80% — price near upper band, retracement likely |
| MACD | Trend direction and momentum shifts | Bullish = upward trend. Bearish = downward. Cross signals trend change. | Bullish or bullish cross — momentum turning up | Bearish or bearish cross — momentum turning down |
| 24h Range | High and low over the last 24 hours | Shows how far price has traveled. Near the high → potential PUT. Near low → potential CALL. | Price near the low end of the 24h range | Price near the high end of the 24h range |
Real Example: Breaking Down a Signal
A real signal pulled from the live feed. Here's why the system shows HOLD for EUR/USD at 15M.
Why HOLD?
- Mixed signals: RSI at 59.7 is in neutral territory. BB position at 94.4% is mid-range. MACD shows bullish but without extreme readings elsewhere. When indicators don't align, the system defaults to HOLD — better to skip the trade than force a direction.
Multi-Timeframe View
Every signal card shows the same pair on six other timeframes, from 1M to 1D. Use this to spot agreement or conflict across expiries.
- Aligned timeframes — if 1M, 5M, and 15M all show CALL, the short-term trend is consistently bullish. Your 15M CALL has supporting evidence from faster charts.
- Conflicting timeframes — if 5M shows PUT but 1H shows CALL, the short-term momentum disagrees with the longer trend. These setups carry more risk. Consider waiting for alignment.
- Click any timeframe to jump directly to its full signal card with detailed indicator breakdown.
Trading Sessions
Every signal card shows which trading session is active and its strength. Each session trades differently — volume, spreads, and pair activity shift throughout the day.
Asia / Pacific
Low Volatility6pm–3am ET. Lower volume, tighter ranges. Signals in this session often suit shorter expiries (1M–5M) because breakouts are less common. Pairs like AUD/USD, NZD/USD, and USD/JPY tend to be more active.
London
High Volatility3am–8am ET. The most liquid forex session. EUR/USD, GBP/USD, and EUR/GBP see the most movement. Signals here can resolve quickly — 5M and 15M expiries work well. Be aware that news events during this window can override technical signals.
London / NY Overlap
Highest Volume8am–12pm ET. Peak liquidity. Two major sessions overlap — spreads tighten and moves can be sharp. This is the best window for 1M–5M turbo signals but also the riskiest because reversals happen fast.
New York
Moderate Volatility12pm–5pm ET. Volume tapers off after the overlap. USD pairs remain active. 5M–15M expiries are typical. After 3pm, liquidity starts to thin — wider expiries or fewer trades may be the safer approach.
Practical Tips for Using Signals on Quotex
1. Match expiry to the signal timeframe
If you select a 5-minute signal, set your Quotex expiry to 5 minutes. The indicators were calculated for that duration — using a different expiry throws off the numbers.
2. Check the multi-timeframe view
Before entering a trade, glance at the timeframe comparison below the signal. If the adjacent timeframes (one step faster, one step slower) agree with your direction, the signal has stronger context. If they disagree, the trade carries additional risk.
3. Avoid trading right before news
Economic releases (NFP, CPI, FOMC, ECB rate decisions) can override any technical signal instantly. Check an economic calendar before trading. The signal card's analysis doesn't account for upcoming news events.
4. Look for extreme indicator readings
The strongest signals come from extreme levels: RSI below 25 or above 75, BB position below 5% or above 95%, fresh MACD crosses. These setups tend to produce the cleanest mean-reversion moves. Moderate readings (RSI 40–60) are weaker.
5. Manage your risk
No signal works 100% of the time. Risk 1–2% of your balance per trade. On a losing streak, reduce trade size — don't chase. Signals help — they don't predict.
6. Watch for MACD divergence
When the analysis mentions MACD running opposite to the signal, pay attention — momentum and price action disagree. These setups resolve sharply in one direction. Either wait for MACD to flip or skip the trade.
Frequently Asked Questions
What does a CALL signal mean?
A CALL signal means the indicators (RSI, Stochastic, MACD, Bollinger Bands) collectively point to an expected upward price move. On the Quotex platform, you would place a CALL (Up) trade — you profit if the price closes above your entry level at expiry.
What does a PUT signal mean?
A PUT signal means the indicators point to an expected downward move. On Quotex, you place a PUT (Down) trade — you profit if the price closes below your entry level at expiry.
What is a good confidence score?
65% or higher indicates strong alignment across indicators. Below 60%, the indicators are pulling in different directions — these signals carry more uncertainty. Use your own judgment alongside the score.
Which timeframe should I use?
It depends on your trading style. 1M–5M suits fast scalping during active sessions (London, NY overlap). 15M–30M works for intraday swings. 1H–4H is for longer holds. Beginners often start with 5M or 15M — fast enough to see results but not so fast that noise dominates.
Should I trade every signal?
No. Signals are a filter, not an auto-trader. Skip signals during low-volume sessions (weekend, late Asia), right before major news events, or when the multi-timeframe view is conflicting. Quality over quantity.
Why did a high-confidence signal lose?
Technical indicators reflect past price data. They can't predict news events, sudden market shifts, or random volatility. A 75% confidence signal still has a 25% chance of playing out differently. That's why risk management matters.
How often do the signals update?
The data feed refreshes every 5 minutes. If you leave a signal open in your browser, the numbers won't auto-update — reload the page or re-select your pair to get fresh data.